The ABS Horizontal Stabilizer tips protrude a bit forward at the very front due to the positive draft angle so we can get them off the mold when formed. This interferes with a good fit. Using a sharpie, mark on the tip where the aluminum skin overlaps, modify the tip as shown in the photo just shy of your mark. Perfect fit!
![](https://static.wixstatic.com/media/a27d24_8793b70f0e0740ae96ca09ab5b71d586~mv2.jpg/v1/fill/w_980,h_735,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/a27d24_8793b70f0e0740ae96ca09ab5b71d586~mv2.jpg)
Glad we could help!
Eddie very timely. I pulled them out of the storage box yesterday to do this morning.